If you're searching for where to get ceramic coating in Lubbock, the honest answer is that the shop matters more than the product. Two installers can buy the identical bottle of CarPro CQuartz and hand you completely different results, because 80% of a coating's outcome is decided before any coating touches the paint.
Here's what to actually look for, and what we do at our shop on Frankford Ave.
Ceramic coating needs a controlled environment. The product needs a dust-free space, temperature between roughly 65–80°F, and proper lighting to inspect every panel during application and cure.
Lubbock works against all three outdoors. Caliche dust rides every wind gust. Summer surface temps flash-cure a coating before it can level. A driveway or parking lot cannot control any of it.
We're shop-based at 13209 Frankford Ave, Suite 4 — not because it's more convenient for us, but because a coating applied in a compromised environment will not bond or cure properly no matter how good the product is.
A ceramic coating is transparent and permanent for its lifespan. Whatever is on your paint when it goes on gets locked underneath — swirl marks, water spot etching, embedded caliche, oxidation.
That's why cheap coatings often look worse a month later. Not because the product failed, but because it sealed in every defect that was already there.
Our process: foam pre-wash, iron fallout removal, clay bar decontamination, machine paint correction, IPA panel wipe, then panel-by-panel coating application under dedicated lighting.
Our packages start at $799 for 2-year CarPro CQuartz SiC, $1,299 for 5-year DQuartz, and $1,899 for 10-year DQuartz + Gliss. Trucks and large SUVs add $150–$600 depending on surface area.
Pricing is published rather than quoted after the fact. If a shop won't give you a range before you arrive, that's worth noting.
Delicate Details is at 13209 Frankford Ave, Suite 4, Lubbock TX 79424, off the Frankford corridor in south Lubbock near Loop 289 and Slide Road. Mon–Fri 9–5, Sat 10–5.
We serve Lubbock, Wolfforth, Shallowater, Slaton, Idalou, Levelland, New Deal, Ransom Canyon, and the surrounding South Plains.
Delicate Details is a shop-based ceramic coating studio at 13209 Frankford Ave, Suite 4, Lubbock TX 79424. We install CarPro CQuartz SiC and DQuartz coatings with full decontamination and machine polish prep included. Call (806) 855-8042.
Shop-based, for ceramic coating specifically. Coatings require a dust-free, temperature-controlled environment and proper inspection lighting to bond and cure correctly. Lubbock's caliche dust, wind, and summer heat make outdoor application unreliable regardless of product quality.
At Delicate Details, 2-year CarPro CQuartz SiC starts at $799, 5-year DQuartz at $1,299, and 10-year DQuartz + Gliss at $1,899. Trucks and large SUVs add $150-$600 based on surface area. All packages include full decontamination and machine polish prep.
Plan on a full day minimum, and often overnight. Proper decontamination, machine correction, application, and cure cannot be compressed into a few hours. Any shop offering same-day turnaround on a multi-year coating is skipping prep.
Delicate Details is a shop-based studio at 13209 Frankford Ave, Suite 4, Lubbock TX 79424. Serving Lubbock, Wolfforth, Shallowater, Slaton, Idalou, Levelland, and the South Plains.
Get Your Free Quote →