Expert paint correction for Tech Terrace vehicles — 1-step, 2-step, and 3-step machine polishing to remove swirl marks, UV oxidation, hard water etching, and scratches. Shop-based at 13209 Frankford Ave, 12–15 min away.
Tech Terrace sits adjacent to Texas Tech University — older homes, consistent street parking, and a vehicle mix heavy on European imports, compact sedans, and trucks. Street-parked vehicles here face maximum UV exposure with zero shade cover.
Street parking in Tech Terrace means no protection from Lubbock's intense UV radiation, bird droppings, tree sap, and wind-driven caliche dust. Without ceramic coating or a quality sealant, paint oxidizes faster than anywhere with covered parking.
12–15 min to our shop
13209 Frankford Ave, Suite 4
Lubbock TX 79424
Prices are by vehicle size. Get an exact quote for your specific vehicle.
Single-stage machine polish to remove light swirl marks, oxidation haze, and minor surface scratches. Good for vehicles in decent shape that need a clarity boost.
Two-stage compound and polish to remove moderate scratches, heavy swirl marks, and hard water etching. The right call for most vehicles with visible paint damage.
Full multi-stage cut, compound, and finish polish for severe paint damage, deep scratches, and heavy UV oxidation. Maximum defect removal.
Lubbock's environment is harder on vehicles than most people realize.
Automatic car wash brushes and ribbons drag abrasive particles across clear coat in circular patterns — visible as a spiderweb in direct sunlight. Machine polishing with the right compound and pad removes these defects completely.
Lubbock's 263+ sunny days per year break down clear coat chemistry over time, turning bright paint dull, cloudy, and chalky. Multi-stage paint correction cuts through the oxidized layer and exposes healthy paint underneath.
Lubbock's high-mineral water leaves calcium deposits that chemically etch into clear coat when they evaporate. Light etching polishes out. Severe etching may require wet sanding. We'll assess and tell you what's achievable.
Road debris, parking lot contact, and caliche buildup create deeper scratches into the clear coat layer. 2-step and 3-step correction use aggressive compounds to cut below scratch depth and restore a level, clear surface.
A 1-step typically takes 4–6 hours. A 2-step runs 6–8 hours. A full 3-step is usually a full day or into the next morning for larger vehicles. We'll give you a specific timeframe when you book.
Scratches through the clear coat into the color layer or bare metal can't be corrected with polishing — they need touch-up paint or respray. We'll tell you exactly what polishing can and can't achieve during the inspection.
Primarily automatic car washes. The brushes and ribbons drag abrasive particles across clear coat in circular patterns. Improper hand washing with dirty mitts does the same. Machine polishing removes existing swirls — ceramic coating or sealant prevents new ones.
Yes — we won't apply ceramic coating over uncorrected paint. Coating amplifies whatever condition the paint is in. Swirl marks under a coating look worse, not better. Correction first, coating second.
Yes — Tech Terrace is about 12–15 minutes from our Frankford Ave shop. Students and faculty drop off regularly, often in the morning before class. Call (806) 855-8042 or book online.