Ceramic Coating Paint Correction DetailingWindow TintingAviation Gallery Blog Contact (806) 855-8042 Membership → Book Now
Ceramic Coating

Ceramic Coating in New Deal
Lubbock TX Shop

Professional ceramic coating installation for New Deal vehicles — condition-matched decontamination, inspection-based paint preparation, and CarPro ceramic application in a controlled shop environment. Shop at 13209 Frankford Ave in Lubbock; use live directions.

Book Now (806) 855-8042
Quick Answer

Delicate Details installs professional ceramic coatings for New Deal vehicles, from $799 for a sedan. Three tiers: 2-Year CarPro CQuartz SiC at $799 sedan ($899 SUV, $1,099 truck), 5-Year CarPro DQuartz at $1,299 sedan, and 10-Year CarPro DQuartz + Gliss at $1,899 sedan, with SUV and truck pricing running higher across all three tiers. The shop is at 13209 Frankford Ave, Suite 4. Check live directions from New Deal because route and travel time vary with traffic and road work. Every coating includes condition-matched decontamination and inspection-based paint preparation before application, done in a controlled shop environment.

About the Area

New Deal
West Texas Paint Challenges

New Deal is a small agricultural community north of Lubbock — farm country, open skies, and trucks that work hard. Vehicles here deal with serious contamination from farm operations, caliche roads, and agricultural chemical exposure that standard washes don't fully address.

Agricultural vehicles from the New Deal area carry heavy contamination — caliche buildup in wheel wells, iron fallout from brake dust, and bonded surface contamination that requires professional decontamination to remove. A standard car wash doesn't touch this level of buildup.

Directions

Check the live route

Address

13209 Frankford Ave, Suite 4
Lubbock TX 79424

Phone

(806) 855-8042

Ceramic Coating Pricing

Transparent Pricing
No Hidden Fees

Prices are by vehicle size. Get an exact quote for your specific vehicle.

2-Year — CarPro CQuartz SiC

CarPro CQuartz SiC with condition-matched decontamination and inspection-based paint preparation. This two-year tier adds hydrophobic behavior that can make water and caliche residue easier to remove.

Sedan$799
SUV$899
Truck$1,099
Book Now
10-Year — CarPro DQuartz + Gliss

DQUARTZ finished with Gliss in our 10-year service tier. Condition-matched decontamination and inspection-based paint preparation are included; added correction is confirmed separately and written maintenance terms apply.

Sedan$1,899
SUV$2,299
Truck$2,599
Book Now
Why It Matters

What Damages Paint
in West Texas

Lubbock's environment is harder on vehicles than most people realize.

Sun and Outdoor Exposure

Sun and heat contribute to long-term weathering, especially on vehicles parked outdoors. A product-specific coating can add a sacrificial, easier-to-clean surface, but it does not make paint immune to fading or clear-coat failure.

Caliche and Windblown Dust

Caliche and road dust still settle on coated paint. Hydrophobic behavior may help during a thorough pre-rinse and wash, but the coating does not block grit or prevent scratches from wiping a dusty surface.

Mineral-Rich Water

Mineral residue can still dry on coated paint and cause spotting or etching. Hydrophobic behavior can make water easier to remove, but prompt drying and safe spot treatment remain necessary.

Iron Fallout and Chemical Resistance

Ferrous residue can remain bonded to an unprotected surface after ordinary washing. Ceramic coating can make routine cleanup easier, but it does not stop contamination from reaching the vehicle.

Questions

Ceramic Coating
Common Questions

How long does ceramic coating take to install?

We normally reserve a full-day or overnight window for inspection, condition-matched preparation, application, and initial cure steps. Actual pickup timing depends on the vehicle, approved scope, product instructions, and shop conditions; we confirm it with the appointment.

Do I need paint correction before ceramic coating?

Not automatically. A transparent coating does not hide existing defects, but polishing removes measurable material and should match the paint and desired result. We inspect the finish first, use the least aggressive effective preparation, and confirm any added correction before work begins.

What's the difference between SiO2 and Silicon Carbide?

SiO2 and SiC describe parts of a coating's chemistry, but the labels alone do not predict real-world performance. Compare the installed product, preparation, covered surfaces, service term, maintenance requirements, and exclusions. We explain those details for each offered tier before installation.

How long until I can wash the vehicle after coating?

Follow the written pickup instructions for the coating installed on your vehicle. Cure and first-wash guidance can vary by product and conditions. If the vehicle gets wet or contaminated early, contact us before wiping or washing it.

Is it worth making the drive from New Deal to your shop?

We are shop-based at 13209 Frankford Ave, Suite 4 in Lubbock. Use the map listing for current directions and travel time, then contact us to compare the service scope with the drive and confirm a drop-off window.

Ceramic Coating for New Deal Vehicles

Get a free ceramic coating quote for your vehicle.

Ceramic coating being applied in our shop — Delicate Details, serving New Deal, TX

Related Guides

Book Now Call Us